Tape power-saw bench Avangard-LP-80 S.E.N. with the mechanized guides

The horizontal band sawmill AVANGARD-LP-80 S. E. N. in full equipment belongs to the class of professional equipment for sawing round wood with a diameter of up to 600 mm for uncut and edged lumber. The structures of the movable saw carriage and guides for its movement are assembled from thick-walled profile pipes, which ensures their rigidity and lack of vibration.

Mechanized guides are equipped with hydraulic devices for loading, turning and fixing raw materials during the sawing process, a hydroelectric station is included. AVANGARD LP-80 S. E. N. band sawmill with mechanized guides is not inferior to the best Western models produced by SERRA (Germany), WOOD-MIZER (USA), PEZZOLATO (Italy), etc.

All the mechanisms of the sawmill are controlled by one operator using 2 control panels.

Control panel

Avangard-LP-80 S. E. N. band sawmill control panel.

The electric control panel controls all the mechanisms of the saw carriage:

1. The main drive of saw pulleys with a power of 18.5 kW, equipped with a soft start device.
2. Drive for lifting and lowering the traverse with setting to the size of the electronic ruler.
3. Drive for longitudinal movement of the saw carriage with stepless speed adjustment depending on the load.
4. Drive debarker (input – output and rotation of the circular saw).

5. Drive for moving the combined band saw support unit

   The drive for moving the combined support unit of the band saw, consisting of a pressure roller and a slot block mounted on a polished sliding rod.

Container for collecting sawdust

A container for collecting sawdust with an electrically controlled flap for automatic unloading at a specified location.

Options can be added to the basic configuration of the saw carriage:

1. Claw device for removing lumber during the reverse course of the saw carriage.
2. A container for collecting sawdust with an electrically controlled flap for automatic unloading at a specified location.
3. Laser cutting pointer complete with stand.

Control panel for hydraulic mechanisms

Control panel for hydraulic mechanisms of the guides of the LP-80 SEN band sawmill.

The hydraulic mechanisms of the sawmill guides are controlled from the second panel.

The basic package includes:

• log loading mechanism;
• chain tilters;
• three pairs of side clips;
• the equalizer log on the horizon.

Additional option

Additional options for the LP-80 SEN band sawmill.

Mechanisms can be installed as additional options:

• axial movement of the log;
• end clamps for forcibly pressing the sawn raw material ( in case of its deformation due to internal stress relief) to the support surfaces of the guides.

Scope of delivery (basic configuration):

1. Saw traverse Assembly with mechanical feed - 1 piece.
2. Ham cutter (debarker) - 1 pc.
3. Guide tracks (mechanized) - 1 pc.
4. Remote control with electronic ruler - 1 pc.
5. Control panel for hydraulic mechanisms - 1 pc.
6. Saw belt, 51 mm wide - 1 pc.
7. User manual - 1 copy
8. Passport - 1 copy

Cost of additional options:

1. Claw device for removing lumber during the reverse course of the saw carriage
2. A tank for collecting the sawdust with electrically-controlled shutter for automatic unloading at the specified location
3. Laser cutting pointer complete with stand
4. Mechanisms of axial movement of the log
5. End clips (1 pc.)

Specifications of Avangard-LP-80 S.E.N. bandsav sawmill with standard guides

In the summary table, you can compare the technical characteristics of band saws.