Band-dividing machine Avangard-LP-80 S.E.N.-2D-Sh
The belt dividing machine «Avangard-LP-80 S.E.N.-2D-Sh» is equipped with a belt conveyor for feeding the workpiece into the cutting zone. Sawing is performed by a band saw in a horizontal plane when passing the workpiece relative to a fixed band saw head.
An additional saw assembly allows you to increase productivity by reducing the number of repeated passes (cuts).
Depending on the material being processed, it is possible to dispense with the use of a return conveyor.
Technical characteristics of the band dividing machine Avangard-LP-80 S.E.N.-2D-Sh
| Width of the sawn material (width × height) | mm | 800 × 250 |
| Distance from the saw to the conveyor | mm | 15-250 |
| Main drive power (with soft start device) | kW | from 11 before 18,5 |
| Conveyor drive power | kW | 2,2 |
| Return conveyor drive power | kW | 1,1 |
| Feed rate | m/min | 0-20 |
| Diameter of saw pulleys | mm | 660 |
| Overall dimensions (L × W × H) | mm | 6000 × 2600 × 2050 |