Band-dividing machine Avangard-LP-80-2D
The Avangard-LP-80-2D belt dividing machine has two saw heads mounted on a common subframe with two feed conveyors that allow processing two humps simultaneously.
AvangardLP-80-2DVideo of the Avangard-LP-80-2D belt dividing machine
Video of the tape-dividing machine Avangard-LP-80-2D.
2018-11-07T16:19:27Avangard-LP-80-2D band re-saw machine
The band re-saw machine of this model has two saw heads mounted on a common under frame with two infeed conveyors that allow to process two logging slabs simultaneously. In one cutting, two unedged boards are cut off from each logging slab, so it is advisable to use the machine as part of a line for sawing longwood. The logging slabs obtained on the headrig are loaded on the receiving roll table of the re-saw machine by belt conveyors of the headrig. Sawn logging slabs go to the intermediate roll table, from which they are fed to the edge-trimming machine SDK-6.
Specifications of Avangard-LP-80-D band re-saw machine
Parameter | Value |
---|---|
Maximum size of the material to be cut: | |
- width | 300 mm |
- length | Not limited |
Sawbox: | |
- amount of heads | 2 |
- power and amount of electric motors | 11 kW 1 pc. |
Infeed conveyor: | |
- amount | 1 |
- power and amount of electric motors | 1,5 kW 2pc. |
- lifting and lowering of the saw traverse | electromechanical |
- setting the size | by visual ruler |
Overall dimensions: | |
- length | 4,05 m |
- width | 2,18 m |
- height | 2,15 m |
In the summary table, you can compare the technical characteristics of band re-saw machine.