Mineral wool cutting machine Avangard-LP-80-3d-1200
The machine is designed for cutting various materials by thickness, including mineral wool slabs. It includes 3 horizontal band saw units mounted on a common subframe with a feed belt conveyor equipped with clamps.
AvangardLP-80-3D-1200Video of the machine for cutting mineral wool Avangard-LP-80-3D-1200
Video of the mineral wool cutting machine-LP-80-3D-1200.
2020-01-21T12:33:55
The machine is designed for cutting various materials by thickness, including mineral wool slabs. The machine includes 3 horizontal band saw units mounted on a common under frame with an infeed belt conveyor equipped with clamps.
One of the 3 band saw units has a mechanism for adjusting the slope angle of the band saw blade to the conveyor plane from 0 to 15 degrees.
The machine can perform the following functions:
1. Cutting by thickness in the horizontal plane with 3 saw units
2. Slabs sawing at the desired angle with one saw unit that has a slope angle adjustment mechanism (the other two saw units are removed from the sawing area at the time of curve sawing).
Technical specifications of the Avangard-lp-80-3d-1200 machine for sawing mineral wool slabs
| Parameter | Value |
|---|---|
| Максимальный размер распиливаемого материала | |
| width | 1200 mm |
| thickness | 250 mm |
| length | 2400 mm |
| Sawbox | |
| the amount of blade nodes | 3 pc. |
| power and amount of electric motors | 7,5 kW × 3 pc. |
| minimum position of the band saw above the conveyor | 10 mm |
| Diameter of the saw pulleys | 660 mm |
| cut thickness | 1,5 mm |
| Saw blade width | 27; 34 mm |
| the mechanism of a tension of the sawing tape | hydraulic (manual hydraulic pump with pressure gauge control) |
| the speed of the saw tape | 23 m/sec |
| Feed conveyor with clamps | |
| amount | 1 pc. |
| length | 6000 mm |
| conveyor drive power | 2,2 kW |
| The feed rate of the material | smoothly adjustable from 0 to 25 m/min |
| Lifting and lowering of the saw traverse | electromechanical drive |
| Setting the size | by visual ruler |
Supply package:
1. Band saw unit – 3 pc..
2. Mechanism for adjusting the angle of inclination of the band saw unit – 1 pc..
3. Infeed conveyor – 1 pc..
4. Band saw blade – 3 pc..
5. Technical specification – 1 copy.
The machine can be completed with a drive roller conveyor, equipped with a cutting plate end unit and a movable adjustable stop.
Delivery set:
1. Band saw unit – 3 pc..
2. Mechanism for adjusting the angle of inclination of the band saw unit – 1 pc..
3. Infeed conveyor – 1 pc..
4. Band saw blade – 3pc..
5. Drive roller conveyor – 1 pc..
6. Miter Assembly – 1 pc..
7. Movable adjustable stop – 1 pc..
8. Technical specification – 1 copy.
The cost of the machine in this configuration – 1 775 000 .
As an additional option, delivery is possible Avangard-LS-50-600 vertical bandsaw machine