Avangard-LP-60-A bandsaw sawmill
With Honda engine 4148 ; 4932
With Lifan engine 3398 ; 4041
The Avangard-LP-60-A bandsaw sawmill is designed for sawing logs with a diameter of up to 650 mm from any wood species (including hardwoods) into a beam, an edged, one-side edged and unedged board, as well as a rail using band saw blades, corresponding to different types and diameters of wood. Technical specifications of sawmills allow for radial and tangential sawing of logs, as well as split sawing or breakdown of logs. Sawing is done in the horizontal plane by moving the band saw blade along the guideway with the stationary position of the log being processed.
One of the main advantages of the sawmill is the design of the saw cross piece which provides two-support saw pulley shafts mount (and not single-sided support like most manufacturers can offer), which significantly reduces the load on them. The cross piece has a telescopic design with high rigidity and provides the convenience of hydraulic tension of band saw blades. The saw pulleys are made of high quality castings and are well balanced.
Specifications of Avangard-LP-60-A bandsav sawmill
|Maximum log diameter, mm||650|
|Log length, m||1 ... 6,5|
|Maximum sawing height (timber thickness), mm||330|
|Saw pulley diameter, mm||560|
|Saw blade width, mm||32, 38|
|Bandsaw sawmill support type||rollers|
|Saw carriage motion drive||hand-operated|
|Cross piece lifting/lowering drive||hand-operated|
|Sawmill drive motor: type, power||Lifan gasoline-powered engine 22 HP
Honda Petrol gasoline-powered engine 20 HP
|Gross installed power capacity, kW||11|
|Overall dimensions L × W × H, m||8 × 2,2 × 2,05|
|Weight with guides, kg||1000|
In the summary table, you can compare the technical characteristics of band saws.