Disk multi blade rip saw machine is the vanguard of MDV.2-16 are intended for sawing up of carriages on the edged boards and may be aggregated with any broswser machine. The carriages are sawn in a vertical position, passing through a saw Assembly with two vertical shafts. The feed drive is independent of the brussing machine and consists of 8 vertically mounted drive ripples.
Technical characteristics of the disk multi-saw machine Avangard MDV.2-16
Parameterр | Value |
---|---|
The thickness of sawn gun carriage, mm | 70...160 |
Width of the sawn carriage, mm | до 300 |
Diameter of the saw blades used, mm | 250 |
Distance between extreme saws, mm | 240 |
The number of saws on the same shaft, pc. | 6…8 |
The power of the main drive | 2 × 22 kW |
The feed drive of the workpiece | gear motor 4 × 0,75 kW |
Feed rate (smoothly adjustable), m/min | 4…10 |
Machine dimensions, L×W×H, m | 1,6×1,95×1,5 |
Weight of machine, not more kg | 1000 |