Avangard-KS-50-PK circular sawmill
Here you can buy a disk sawmill Avangard-KS-50-PK of your own production. Designed for sawing round raw materials up to 500 mm and up to 6.2 m long with two Circular saws.
AvangardAvangardVideo of Avangard-KS-50 disk sawmill-PK
Video of Avangard-KS-50-PK disk sawmill operation.
2018-11-07T16:19:27
The Avangard-KS-50-PK circular sawmill is a mill designed for sawing round raw materials with a diameter of up to 500 mm and a length of up to 6.2 m with two circular saw blades.
The sawmill is available only in a stationary version and consists of a movable saw carriage with circular saw blades and a dismountable frame with high-precision guides. The frame is equipped with hydraulics, including a device for loading logs, a turner and a device for fixing logs during sawing. The saw carriage includes a saw block consisting of two horizontal circular saws with a diameter of 400 mm, electromechanical drives for lifting and lowering the saw cross piece and longitudinal movement, which have a smooth speed adjustment, as well as an additional option – an edge-trimming device (see below).
Hydraulic mechanisms installed on the frame allow to perform all operations with the log in the central "tray" formed by side clamps that provide automatic alignment of the raw material to be cut, which allows you to implement the following sawing scheme:
| Sawing into half-timber and unedged boards | Sawing half-timber into edged boards | Cutting of edges of an unedged board | |||
 Sawing into half-timber and unedged boards Sawing on the carriage and uncut boards with a disk sawmill Avangard-KS-50 |
 Sawing into half-timber and unedged boards Sawing on the carriage and uncut boards with a disk sawmill Avangard-KS-50 |
 Sawing the carriage on edged boards with a disk sawmill Avangard-KS-50 Sawing the carriage on edged boards with a disk sawmill Avangard-KS-50 |
 Sawing half-timber into edged boards Sawing the carriage on edged boards with a disk sawmill Avangard-KS-50 |
 Cutting of edges of an unedged board Cutting edges of an uncut Board with a disk sawmill Avangard-KS-50 |
 Cutting of edges of an unedged board Cutting edges of an uncut Board with a disk sawmill Avangard-KS-50 |
Edge-trimming device
The saw carriage is equipped with an edge-trimming device. It consists of the vertically mounted saw blades that cut off the edges of the unedged board obtained as a result of sawing with the main horizontal saw blades. You can install up to four vertical saw blades working simultaneously, two of which are adjusted to the size by a special screw. The edge-trimming device can be switched on during the sawing process and switched off by lowering-lifting the saw shaft of the vertical circular saw blades by means of a lever.
Edge trimming device
Edge trimming device
The edge-cutting device can be turned on during sawing and turned off by lowering and lifting the saw shaft of vertical circular saws by means of a lever mechanism.
Brief technical specifications:
| Parameter | Value |
|---|---|
| Maximum thickness of a board to be trimmed | 32 mm |
| Width of a board to be trimmed | 100 - 200 mm |
| Diameter of saw blades | 200 mm |
| Power | 3 - 4 kW |
| Voltage | 400 V, 50 Hz, 3-phase |
| The scheme of sawing with the use of the edge-trimming device: | |||
|---|---|---|---|
 The scheme of cutting with the use of edge trimming device Scheme of sawing using an edge-cutting device with a disk sawmill Avangard-KS-50-PK |
 The scheme of cutting with the use of edge trimming device Scheme of sawing using an edge-cutting device with a disk sawmill Avangard-KS-50-PK |
 The scheme of cutting with the use of edge trimming device Scheme of sawing using an edge-cutting device with a disk sawmill Avangard-KS-50-PK |
 The scheme of cutting with the use of edge trimming device Scheme of sawing using an edge-cutting device with a disk sawmill Avangard-KS-50-PK |
All the mechanisms of the sawmill are controlled by one operator using 2 control panels.
Control panel
The electric control panel controls all the mechanisms of the saw carriage :
- All disk saw drives.
- Drive for lifting and lowering the traverse with setting to the size of the electronic ruler.
- Drive for longitudinal movement of the saw carriage with stepless speed adjustment depending on the load.
Control panel for hydraulic mechanisms
The hydraulic mechanisms of the sawmill guides are controlled from the second panel.
The basic package includes:
- log loading mechanism;
- chain tilters;
- three pairs of side clips;
- horizontal alignment of the log.
Additional option
Themechanisms can be set as additional options:
- axial movement of the log;
- end clamps for forcibly pressing the sawn raw material ( in case of its deformation due to internal stress relief) to the support surfaces of the guides.
Configuration:
- saw beam - 1 pc.
- edging block - 1 pc.
- mechanized guides - 1 pc.
- hydraulic station - 1 pc.
- laser pointer for horizontal saws - 1 pc.
- remote control with electronic ruler - 1 pc.
- control panel for hydraulic mechanisms - 1 pc.
- saw blades ∅400 - 2 pc.s.;
- saw blades ∅250 - 2 pc.s.;
- Technical documentation - 1 set.
Specifications of Avangard-KS-50-PK circular sawmill
| Parameter | Value |
|---|---|
| Maximum log diameter: | |
| - diameter | 500 mm with edging, 300 mm in camber |
| - length | from 2 to 6.2 meters |
| The saw carriage: | |
| - diameter and amount of saw blades | 2 × 400 mm, 2 × 250 mm |
| - power and amount of electric motors | 2 × 11 kW, 1 × 4-5,5 kW |
| - the use of reverse | reset of sawn material |
| - lifting / lowering | electric drive |
| - horizontal travel drive / speed | Electromechanical / up to 40 m / min |
| Saw carriage guides | Mechanized |
| Setting the thickness of the board | by electronic ruler |
| Method for loading and positioning raw materials to be cut | hydraulic mechanism |
| Overall dimensions: | |
| - length with guides | 10,0 m |
| - width | 1,4 m |
| - height | 2,0 m |
| Weight of the machine | 2050 kg |
| Completeness of delivery: the machine (saw blade + guides), as well as: | |
| saw blade | - |
| electronic ruler | + |
| laser position indicator for horizontal saws | + |
The machines can be equipped with 7.5 kW electric motors.
In the summary table, you can compare the technical characteristics of circular saws.