Debarker
Debarker hock mill is designed for pre-cleaning the bark of logs on the side of the entrance of the saw belt from sand, resin, clay and other solid inclusions.
AvangardFO
The bark-stripping cutter (debarker) is designed for preliminary cleaning of the bark of logs on the side of the saw blade start from sand, resin, clay and other solid inclusions. Cleaning is performed by cutting the log surface with a disk cutter with carbide plates to a controlled depth. The cutter is used as part of the Avangard-LP-80 bandsaw sawmills. The use of a bark-stripping cutter allows you to significantly increase the service life of the band saw blade.
Specifications of debarker
| Parameter | Value |
|---|---|
| Minimum diameter of the processed log, mm | 250 |
| The minimum depth of sawcut, mm | 8 ± 1 |
| Maximum cutting depth, mm | 30 ± 1 |
| Cut thickness, mm | 4, 0 |
| Working diameter of the cutter, mm | 250 |
| The diameter of the cutter, mm | 32 |
| Electric motor of the cutter drive - power, kW - speed, rpm |
1, 1 2800 |
| The power of the motor-reducer kW | 0, 12 |
| Power supply voltage, V | 380 |
| Weight, kg | 28, 5 |